Unnamed mini button filler conversion

The second restoration project from the weekend.

This is an unnamed button filler pen that was missing the pressure bar. The pen being cheap, I didn't want to get a pressure bar just for this. I decided to convert it into an aerometric filler with the parts I had at hand. I took measurements and fixed a sac to the section. I measured and cut a spare Chinese filler unit to size. I had to cut the J bar also since this pen is so small. Fills and works as it should.

 

Please click on the images to show larger version.

 

 

 

 

 

 

Gold Bond Stonite

This is the first of two restoration projects from the weekend.

A Gold Bond Stonite model from the '30s(?) ring-top which has the ring missing from the cap. I haven't found a replacement yet so that will have to wait for later. The body itself is in good condition with minor wear. It mostly needed a light polish and a sac replacement. Tested the lever mechanism with water and works as expected.

 

The nib is a smooth #4 14k warranted gold nib that I had dip tested earlier.

 

Click on the images below to view larger version.